JOHNSON CONTROLS Industrial Partner

M9216-HGA-2 - Johnson Controls M9216-HGA-2 Electric Motor Actuator. Spring Damper Return |...

larger image

Request Quote
For Price
Part Number:
Model Number:
Lead Time:
Qty In Stock:

Johnson Controls M9216-HGA-2 Electric Motor Actuator. Spring Damper Return | 0-10 VDC | 140 in-lb Torque | 70-130 sec Timing Simple Type: Actuator

The M9216 Series direct-mount, spring return electric actuators operate on 24 VAC or VDC power and are available for use with on/off, floating, proportional, or resistive controllers. These bidirectional actuators do not require a damper linkage, and are easily installed on a damper with a round shaft up to 3/4 in.(19 mm) in diameter or a square shaft up to 5/8 in.(16 mm). M9216 actuators may be direct or remote mounted to a damper, or mounted to a valve using one of the M9000-5xx Valve Linkage Kits.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.


  • A single M9216 model delivers up to 140 lb·in (16 N·m)of torque.
  • actuator motor when a stall condition is detected
  • application.
  • Auto Stroke Calibration(GGx Models)Reduces field installation time and cost due to
  • Available Torques: 140 and 280 lb·in (16 and 32 N·m)Offer selection most suitable for the
  • Bidirectional, Return-to-Normal Spring Return Allows selectable rotation/spring return
  • direction simplifying installation.
  • Electronic Stall Detection ensures higher reliability by deactivating the
  • Extended Temperature Range Meets the needs of most outdoor air applications
  • Integral auxiliary switches are available to indicate end-stop position or to perform switching functions at any angle within the selected rotation range. Position feedback is available through switch
  • Manual Override Allows manual positioning when the actuator is not powered; simplifies setup and field adjustments.
  • NPT Conduit Adaptor (Included)Provides easy connection for electrical fittings and armored cable.
  • Output Position Feedback Provides simple, closed-loop control with accurate position sensing.
  • self adjustment.
  • The angle of rotation is mechanically adjustable from 30 to 90°.
  • Two BGx, GGx, or HGx models in tandem deliver twice the torque or 280 lb·in (32 N·m).
  • Zero and Span Adjustment(HGx Models)Allows sequential operation of dampers from a single input signal of 0 (2) to 10 VDC or 0 (4)to 20 mA.


  • (Running Torque): BGx, GGx, HGx 280 lb·in (32 N·m) for two units in tandem.
  • Auxiliary Switch Rating xGC: Two SPDT (Single-Pole, Double-Throw) switches rated at 24 VAC,
  • Cycles: 65,000 full stroke cycles
  • Dimensions: (H x W x D) 9.82 x 4.57 x 3.62 in. (249.4 x 116.0 x 91.9 mm)
  • Electrical Connection: GGx 1/4 in. spade terminals with pluggable terminal blocks (See Table 2.)All Other Models: Screw terminals for 22-14 AWG; maximum of two 18, 20, or 22 AWG each M9000-100 One included with all models; two included with AGD, AGE, and xGC
  • Enclosure: NEMA 2, IP42
  • Enclosure: NEMA 2, IP42
  • Input Impedance: GGx, HGx Voltage Input, 200,000 ohms; Current Input, 500 ohms JGx: 1.8 Megohms.
  • Mechanical Output: All Models 140 lb·in (16 N·m) for one unit
  • Rotation Range: Adjustable from 30 to 90°, CW or CCW, mechanically limited to 93°
  • Spring Return: Factory Setting CCW; Direction is selectable with the coupler.



  • None Available


  • None Available